How To Apply Toon Brite Clear Coat

Toon Brite

Toon-Brite Protective Clear Coat For Boats

free shipping

Availability:

In Stock - Ships Today

List Price:

Was:

(You save

Current Stock:

FREQUENTLY BOUGHT TOGETHER
DESCRIPTION
REVIEWS
QUESTIONS & ANSWERS
OTHER DETAILS

FREQUENTLY BOUGHT TOGETHER

Total Price:
Add to Cart

Description

Toon-Brite Protective Clear Coat for Boats

This Toon-Brite Protective Clear Coat for Boats rejuvenates fading or oxidizing metal surfaces and provides a long-lasting barrier against the elements. It is a perfect clear coat option for aluminum, fiberglass, brass, copper, stainless, and other metal surfaces. This protective clear coat is designed from a corrosion-resistant non-conductive formula and will make future boat cleaning considerably easier. It will provide years of protection against oxidation, UV rays, weathering, stains, salt spray, and electrolysis. Easily apply a clear-coat with either a 3-4 inch foam brush or spray it using an HVLP type sprayer. Be sure to clean and dry the vessel surface prior to application.

Features:

Makes Future Cleaning Much Easier
Works On Aluminum, Fiberglass, Brass, Copper, Stainless and Most Metal Surfaces
Protects For Years Against Oxidations, UV Rays, Weathering, Stains, Salt Spray and Electrolysis
Restores and Rejuvenates Faded Or Oxidized Surfaces
Will Not Chip Or Peel
Corrosion Resistant
Great Color Restorer
Reduces Maintenance For Both Metal and Fiberglass
Non-Conductive

Sizes Available:

Gallon Coverage: 800-1200 Sq Ft.
12 oz. Spray Coverage: 120 Sq Ft

**Clear-coat is not an anti-fouling paint.

How to Apply Toon-Brite Protective Clear Coat

Toon-Brite Protective Clear Coat can be applied to aluminum, fiberglass, stainless steel, brass, copper, and galvanized steel. All surfaces must be clean, dry, and free of all contaminants (especially waxes, grease, & oils) prior to application.

Coverage:One quart will cover approx. 200-300 sq. ft.

Surface Preparation

Metal

Thoroughly clean surface with an acid wash.
Once the surface has been properly cleaned, test the surface for adhesion by applying Clear-Coat to a small area and observe for 5 minutes.
If the coating stays flat and flows out, the surface is adequately clean.
If beading occurs, re-clean.
Once surface is properly cleaned, apply 2 coats (or more) of Toon-Brite Clear Coat.

Fiberglass

Thoroughly clean the surface of oxidation, wax, and polish.
For heavy build up, use Toon-Brite Fiberglass Cleaner.
Apply Toon-Brite Clear Coat. Multiple coats may be necessary.
Follow up with fiberglass polish then wax.

Application Information

Provide adequate ventilation when applying Clear Coat and remove all sources of ignition or spark.
To apply by hand, use a 3" or 4" foam applicator.
To apply by spray, Toon-Brite recommends using a HVLP paint gun. If needed, dilute with acetone.
Apply to the surface in long even strokes being careful not to let runs or sags develop.
Make sure to overlap each pass.
The surface temperature should be above 50°F. Do not apply when humidity is above 85%.
For applications requiring multiple coats, the preceding coat should be dry to the touch.
Allow at least 8 - 24 hours to cure.

Clean up can be done with soap and water for hands. Use acetone or lacquer thinner for Clear-Coat clean up.

Toon-brite Protective Clear-Coat FAQ's

Q: What type of surface will Clear-Coat work on?

A: Clear-coat can be applied to Aluminum, Fiberglass, Copper, Brass, Stainless Steel, or any other surface you want to prevent from staining and discoloring.

Q: Can you see Clear-Coat once it's applied?

A: Clear-coat is virtually invisible on all surfaces other than a high polished surface. On a high polish finish, Clear-coat when wiped can sometimes leave slight sheen. This will some what lessen with a second coat and it also tends to diminish with time.

Q: Will Clear-Coat work on painted surfaces?

A: Yes, Clear-coat can be applied to dull painted surfaces that are beginning to get chalky and oxidized. Clear-coat will prevent the chalky finish from returning as well as bring back a rich shiny finish.

Q: What will Clear-Coat protect against?

A: Clear-coat will protect your surfaces from Oxidation, Stains, Weathering, Salt Spray, UV Rays, Corrosion and Electrolysis.

Q: How long will the average application last?

A: On boats that are kept on the trailer, or on a lift, it's not uncommon to get 3 to 4 years of protection, If you leave your boat in the slip all season long, from the water line down, it should last a couple of years or more. There are just too many variables such as water conditions and content, as well as severity of marine growth etc. But from the water line up, you can expect the same protection as any other boat. On things like RV's ECT., you can expect 3 to 4 years.

Q: What temperature is it safe to apply Clear-Coat?

A: Clear-coat can be applied at any temperature but, you'll get a better finish at 50 degrees, than at 90 degrees.

Q: Can I apply Clear-Coat in the sun?

A: Yes you can, but try to avoid direct sunlight if at all possible.

Q: What is "Cure Time"?

A: Although Clear-coat dries to the touch in about 15 minutes, it takes as little as 2 or 3 hours, or as long as 24 hours depending on temperature and humidity.

Q: Do I need to remove the first Clear-coat application before I reapply years later?

A: No, All you need to do is clean with Toon-brite, Aluminum or Fiberglass Cleaner, and apply the new coat.

California Residents: warning sign WARNING Cancer and Reproductive Harm - P65Warnings.ca.gov

PRODUCT REVIEWS

QUESTIONS & ANSWERS

Other Details

Google Product Type:: Cleaners
Wiser:: Yes

Customers Also Viewed

Toon-Brite Pontoon & Aluminum Boat Cleaner

List Price:

Was:

Starting At: Now: $18.49

Toon-Brite Pontoon & Aluminum Boat Cleaner The ultimate solution in aluminum boat cleaners, Toon-Brite has been providing quality products for the professional to the DIYer for years. Toon-Brite...

Choose Options

Starbrite Ultimate Aluminum Boat Cleaner/Restorer

List Price: $33.49

Starting At: Now: $19.49

Starbrite Ultimate Aluminum Boat Cleaner/Restorer - 64 oz. Experience a high-quality aluminum cleaner like no other with Starbrite. Starbrite Aluminum Cleaner is, by far, the best way to clean and...

Add to Cart

Pettit Easypoxy High Gloss Topside Marine Paint

List Price: $43.99

Was:

Starting At: Now: $38.49

Pettit Easypoxy (EZ-Poxy) High Gloss Topside Marine Paint There are a lot of choices when it comes to topside marine paints, however, Pettit is an industry leader in creating superior marine grade...

Choose Options

Toon-Brite Aluminum Boat Polish & Restorer

List Price: $32.99

Starting At: Now: $19.49

Toon-Brite Aluminum Boat Polish & Restorer This Toon-Brite Aluminum Boat Polish & Restorer is formulated to polish and restore aluminum boats, pontoons, houseboats, trailers and canoes. It...

Add to Cart

Starbrite Ultimate Aluminum Boat Polish w/ PTEF - 16 oz.

Starbrite Ultimate Aluminum Polish w/ PTEF

List Price: $20.49

Starting At: Now: $11.99

Starbrite Ultimate Aluminum Boat Polish w/ PTEF - 16 oz. This Starbrite Ultimate Aluminum Boat Polish w/ PTEF is formulated to preserve the finish of aluminum pontoon boats, jon boats and canoes. It...

Add to Cart

Moeller Clear Coat Lacquer - 12 oz.

List Price: $13.99

Starting At: Now: $11.49

Moeller Marine Clear Coat Lacquer - 12 oz. Finishing any paint project should include Moeller's Clear Coat to increase luster and depth. This quick-dry formula features enhanced UV protection and...

Add to Cart

Toon-Brite Fiberglass Boat Cleaner

List Price:

Was:

Starting At: Now: $18.49

Toon-Brite Fiberglass Boat Cleaner Cleaning and keeping their boat in tip-top shape is something many boaters take great pride in. Using the right cleaning products can make this process easy and...

Choose Options

303 Aerospace UV Protectant

List Price: $11.99

Was:

Starting At: Now: $10.39

303 Aerospace UV Protectant For over 40 years, 303 Marine Products has been making 5-star cleaning and protectant products that are trusted by boat owners. Their proven technology helps block out...

Choose Options